Solar Charge Controller MPPT EPever 12/24 V - 10/20/30/40 A

  • $143.75
    Unit price per 
Shipping calculated at checkout.


 

EPever MPPT 40A/30A/20A/10A Solar Charge Controller Black-Light LCD Solar Regulator for 12V 24V Lead Acid Lithium-ion Batteries

1

Overview:

The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducingcharging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.

Connection

Features:

  • Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiency
  • Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
  • Wide MPP operating voltage range
  • High quality components, perfecting system performance, with maximum conversion efficiency of 98%
  • Accurate recognition and tracking of multiple-peaks maximum power point 
  • International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
  • Charging power and current limitation function
  • Compatible with lead-acid and lithium-ion batteries
  • Battery temperature compensation function
  • Real-time energy statistics function
  • Overheating power reduction function
  • Multiple load work modes
  • The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
  • With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
  • Monitor and set the parameters via mobile phone APP or PC software 
  • Full-load operation without any drop in capacity within the range of working environment temperature 
  • Extensive electronic protection 

photo 2

Technical Specifications:

Item Tracer 1206AN Tracer 2206AN Tracer 1210AN Tracer 2210AN Tracer 3210AN Tracer 4210AN
System nominal
voltage
12V/24VDC Auto
Rated charge current 10A 20A 10A 20A 30A 40A
Rated discharge
current
10A 20A 10A 20A 30A 40A
Battery voltage range

8~32V

Max. PV open circuit voltage 46V 92V
MPP voltage range (Battery voltage +2V)~36V (Battery voltage +2V)~72V
Max. PV input power 130W/12V
260W/24V
260W/12V
520W/24V
130W/12V
260W/24V
260W/12V
520W/24V
390W/12V
780W/24V
520W/12V
1040W/24V
Self-consumption <=12mA
Discharge circuit voltage drop <=0.23V
Temperature compensate coefficient -3mV/°C/2V (Default)
Grounding Common negative
RS485 interface 5VDC/100mA
LCD backlight time 60S (Default)
Environmental Parameters
Working environment temperature -25°C~+50°C(100% input and output)
Storage temperature range -20°C~+70°C
Relative humidity <=95%, N.C.
Enclosure IP30
Dimension 172x139 x 44mm 220x154x 52mm 172x139 x 44mm 220x154x 52mm 228x164x55mm 252x180x63mm
Mounting dimension 130x130mm 170x145mm 130x130mm 170x145mm 170x164mm 210x171mm
Terminal 12AWG(4mm 2 ) 6AWG(16mm 2 ) 12AWG(4mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2
Recommended cable 12AWG(4mm 2 ) 10AWG(6mm 2 ) 12AWG(4mm 2 ) 10AWG(6mm 2 ) 8AWG(10mm 2 ) 6AWG(16mm 2 )
Weight 0.57kg 0.94kg 0.57kg 0.94kg 1.26kg 1.65kg
             

 

Accessories (optional):

 

​Remote Temperature Sensor

(RTS300R47K3.81A)

RTS300R47K3.81A

Acquisition of battery temperature for undertaking temperature compensation of

controlparameters, the standard length of the cable is 3m (length can be

customized). The RTS300R47K3.81A connects to the port (4th) on the controller.

NOTE: The temperature sensor short-circuited or damaged, the controller

will be charging or discharging at the default temperature 25°C 

Click

USB to RS485 cable 

CC-USB-RS485-150U

CC-USB-RS485-150U

USB to RS-485 converter is used to monitor each controller on the network

using Solar Station PC software. The length of cable is 1.5m.

TheCC-USB-RS485-150U connects to the RS-485 Port on the controller.

Click

OTG cable

OTG-12CM

OTG-12CM

Used to connect a mobile communication cable and able to achieve real-time

monitoring of the controller and modification of the parameters by using mobile

APP software.

Click

Remote Meter

MT50

MT50

MT50 can display various operating data and fault of the system. The

information can be displayed on a backlit LCD screen, the buttons are

easy-to-operate, and the numeric display is readable.

Click

WIFI Serial Adapter 

eBox-WIFI-01

WIFI

After the controller is connected with the eBox-WIFI-01 through the standard

Ethernet cable (parallel cable), the operating status and related parameters of

the controller can be monitored by the mobile APP software through WIFI signals.

Click

RS485 to Bluetooth Adapter

 eBox-BLE-01

bLE

After the controller is connected with the eBox-BLE-01 through the standard

Ethernet cable (parallel cable), the operating status and related parameters of

the controller can be monitored by the mobile APP software through Bluetooth

signals.

Click

 

 

Photo:

6

Tracer AN18

Comparison MPPT