1.1pcs 18v/10w solar panel
2.1pcs DC+Alligator clip cable
Maximum Power （Pmax）：10W
Open Circuit Voltage（Voc) ： 21.6V
Short Circuit Current （Isc）：0.60A
Maximum Power Voltage（Vmp）：18V
Maximum Power Current（Imp）：0.55A
Maximum System Voltage（Imp）： 1000DC
Product Weight: 230G
Package weight: 390G
STC:lrradiance1000w/m2，Temperature 25 C, AM=1.5
*Output voltage of 18V， charging for 12V batteries.
*Suitable for lead acid batteries and lithium batteries such as automobile, motorcycle, tractors or snowmobile.
*With high efficiency Monocrystalline silicon solar cell
*Built-in blocking diode, prevent your batteries from discharging backwards through your solar panels at night when charger's voltage is lower.
*DC output it can transfer alligator clips, USB, cigarette lighter, etc.
1. Normally we use standard black colour base board, but the colour might be tiny different because of different producing batch.
2. To achieve a certain parameter, the arrangement of the solar cell silicon wafers might be with tiny difference, but the specification is the same as described.
3. The solar cell panel will be covered by PE film, some may with air bubble under the film, it will not effect the performance, you can remove the film, just like the film on the cellphone panel.
4. The colour of silicon solar cell is blue or black.
5. As solar panel, the sunlight strength will effect the performance of the solar cell, please use it in good sunlight.
When using solar panels, please remove the surface protective film